View LSRF2041-PF-TBF-X_4539967.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
TAPE AND BOX TYPE LED LAMPS
Pb
Lead-Free Parts
LSRF2041-PF/TBF-X
DATA SHEET
DOC. NO : REV. DATE : :
QW0905-LSRF2041-PF/TBF-X A 14 - Dec. - 2006
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X Page 1/7
Package Dimensions
H
P2
H2 H1 H L W0
W2
W1
W3
D
P1
F P
-
+
T
LSRF2041-PF
3.0 4.0
4.2
5.2
1.5MAX
0.5
TYP
25.0MIN
1.0MIN 2.54TYP
+
-
Note : 1.All dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X
Page 2/7
Absolute Maximum Ratings at Ta=25
Ratings
Parameter
Symbol
SRF
UNIT
Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V
IF IFP PD Ir
30 90 75 10
mA mA mW
A V
Electrostatic Discharge( * )
Operating Temperature Storage Temperature
ESD
Topr Tstg
2000
-40 ~ +85 -40 ~ +100
Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
COLOR PART NO MATERIAL Emitted
LSRF2041-PF/TBF-X AlGaInP
Dominant wave length
Spectral halfwidth
nm
Forward voltage @20mA(V)
Luminous intensity @20mA(mcd)
Dnm
Lens Red Transparent 630 20 Min. 1.5 Max. 2.4 Min. 300 Typ. 450
Viewing angle 21/2 (deg)
Red
30
Note : 1.The forward voltage data did not including 0.1V testing tolerance. 2. The luminous intensity data did not including 15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X
*Dimension Symbol Information SPECIFICATIONS SYMBOL ITEMS OPTION SYMBOL CODE
-------------------
Page 3/7
Minimum mm inch
0.15 0.19
-------
Maximum mm
4.2 5.8 2.0
inch
0.17 0.23 0.08
Tape Feed Hole Diameter Component Lead Pitch Front-To-Rear Deflection
D F
H
3.8 4.8
-------
Height Of Seating Plane
-------
H
15.5
17.5 19.0 22.5 25.5 21.5
0.61
0.69 0.75 0.89 1.0 0.85 0.8 0.67 0.79 0.74 0.94 0.83
-------
16.5
19.5 21.0 24.5 26.5 22.5 21.2 21.125 22.5 19.8 26.0 23.0 36 11
0.65
0.77 0.83 0.96 1.04 0.89 0.83 0.83 0.89 0.78 1.02 0.91 1.42 0.43 0.51 0.18 0.3 0.06 0.38 0.61 0.16 0.75
TBF-1 TBF-2 TBF-3 TBF-4 TBF-5
Feed Hole To Bottom Of Component
TBF-6 TBF-7 TBF-8 TBF-10 TBF-11 TBF-12
H1
20.2 17.125 20.0 18.8 24.0 21.0
Feed Hole To Overall Component Height Lead Length After Component Height Feed Hole Pitch Lead Location Center Of Component Location Overall Taped Package Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width
-------------------------------------------------------------
H2 L P P1 P2 T W0 W1 W2 W3
-------
W0 12.4 3.15 5.1
-------
0.49 0.12 0.2
-------
13 4.55 7.7 1.42 9.75 15.5 4.0 19
8.5 14.5 0 17.5
0.33 0.57 0 0.69
REMARK:TBF = Tape And Box Forming Leads
* Dimensions Symbol Information
Specification Description Symbol minimum mm Overall Length Overall Width Overall Thickness L W H 330 265 50 inch 13.0 10.4 1.97 maxmum mm 340 275 60 inch 13.4 10.8 2.4
* Package Dimensions
W
L
H
Part No.
LSRF2041-PF/TBF-X
Quantity/Box 2500PCS
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X
*Dimension Symbol Information SPECIFICATIONS SYMBOL ITEMS OPTION SYMBOL CODE
-------------------
Page 4/7
Minimum mm inch
0.15 0.19
-------
Maximum mm
4.2 5.8 2.0
inch
0.17 0.23 0.08
Tape Feed Hole Diameter Component Lead Pitch Front-To-Rear Deflection
D F
H
3.8 4.8
-------
Height Of Seating Plane
-------
H
15.5
19.0 21.7 22.5 17.5 18.5
0.61
0.75 0.85 0.89 0.69 0.73 0.81 1.00 0.81 0.98 0.87 0.98
-------
16.5
20 23.7 23.5 18 19.5 21.5 27.5 22.5 27.0 23.0 26.0 36 11
0.65
0.79 0.93 0.93 0.71 0.77 0.85 1.08 0.89 1.06 0.91 1.02 1.42 0.43 0.51 0.18 0.3 0.06 0.38 0.61 0.16 0.75
TBF-13 TBF-14 TBF-15 TBF-16 TBF-17
Feed Hole To Bottom Of Component
TBF-18 TBF-19 TBF-20 TBF-21 TBF-22 TBF-23
H1
20.5 25.5 20.5 25.0 22.0 25.0
Feed Hole To Overall Component Height Lead Length After Component Height Feed Hole Pitch Lead Location Center Of Component Location Overall Taped Package Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width
-------------------------------------------------------------
H2 L P P1 P2 T W0 W1 W2 W3
-------
W0 12.4 3.15 5.1
-------
0.49 0.12 0.2
-------
13 4.55 7.7 1.42 9.75 15.5 4.0 19
8.5 14.5 0 17.5
0.33 0.57 0 0.69
REMARK:TBF = Tape And Box Forming Leads
* Dimensions Symbol Information
Specification Description Symbol minimum mm Overall Length Overall Width Overall Thickness L W H 330 265 50 inch 13.0 10.4 1.97 maxmum mm 340 275 60 inch 13.4 10.8 2.4
* Package Dimensions
W
L
H
Part No.
LSRF2041-PF/TBF-X
Quantity/Box 2500PCS
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X Page 5/7
Typical Electro-Optical Characteristics Curve
SRF CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
100 10
Relative Intensity Normalize @20mA
4.0 5.0
2.5 2.0 1.5 1.0 0.5 0.0
1.0 0.1 1.0 2.0 3.0
1.0
10
100
1000
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0
Forward Voltage@20mA Normalize @25
Relative Intensity@20mA Normalize @25
-40 -20 0 20 40 60 80 100
2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.1
1.0
0.9
0.8
Ambient Temperature()
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
Relative Intensity@20mA
0.5
0.0 550 600 650 700
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X Page 6/7
Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile Dip Soldering Preheat: 120 C Max Preheat time: 120seconds Max Ramp-up 2C/sec(max) Ramp-Down:-5 C/sec(max) Solder Bath:260 C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body)
Temp( C) 260 C3sec Max
260
5 /sec max
120
2 /sec max
25 0
0
Preheat 120 Seconds Max
100
200
250
Time(sec)
Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSRF2041-PF/TBF-X Page 7/7
Reliability Test:
Test Item
Test Condition
1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs)
Description
This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed.
Reference Standard
MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test
1.Ta=105 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of hogh temperature for hours.
MIL-STD-883:1008 JIS C 7021: B-10
Low Temperature Storage Test
1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
JIS C 7021: B-12
High Temperature High Humidity Test
1.Ta=65 5 2.RH=90 %~95 % 3.t=240hrs 2hrs
The purpose of this test is the resistance of the device under tropical for hours.
MIL-STD-202:103B JIS C 7021: B-11
Thermal Shock Test
1.Ta=105 5&-405 (10min) (10min) 2.total 10 cycles
The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire.
MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011
Solder Resistance Test
1.T.Sol=260 5 2.Dwell time= 10 1sec.
MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1
Solderability Test
1.T.Sol=230 5 2.Dwell time=5 1sec
This test intended to see soldering well performed or not.
MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2

▲Up To Search▲

Price & Availability of LSRF2041-PF-TBF-X

	To Download LSRF2041-PF-TBF-X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .